Utility Industries, Inc logo

Products

We offer three main products in varying sizes as needed for your project. Click on the items below for information including recommendations, size charts and more.

The Pulling Eye pictured at right is a compression sleeve attachment to cable ends for pulling single conductor cables of all types, copper or aluminum, solid dielectric or paper and lead cables.

As a result of extensive testing, U.I.I. recommends these pulling attachments to facilitate careful handling of cables during the critical pulling phase of cable installation. These devices were designed to handle the toughest pulls with consistent reliablity and to avoid the usual necessity for discarding the several feet of damaged cable under the woven portion of basket-type pulling attachments.

The assemblies are easily waterproofed through the use of U.I.I. heat shrinkable sleeves with special flexible waterproof adhesive under-coating. Because the Pulling Eyes or Bolts use standard crimping tools, they are easily installed by cable manufacturers, utility splice crews, or electrical contractors. Simply strip cable and insert into Pulling Eye/Bolt, crimp and install heat shrinkable sleeve.


The Pulling Bolt pictured at right is a compression sleeve attachment to cable ends for pulling multi-lexed or paralleled single conductor cables (either copper or aluminum) with U.I.I. Pulling Eye Plates designed to pull three conductors with or without a neutral.

As a result of extensive testing, U.I.I. recommends these pulling attachments to facilitate careful handling of cables during the critical pulling phase of cable installation. These devices were designed to handle the toughest pulls with consistent reliablity and to avoid the usual necessity for discarding the several feet of damaged cable under the woven portion of basket-type pulling attachments.

The assemblies are easily waterproofed through the use of U.I.I. heat shrinkable sleeves with special flexible waterproof adhesive under-coating. Because the Pulling Eyes or Bolts use standard crimping tools, they are easily installed by cable manufacturers, utility splice crews, or electrical contractors. Simply strip cable and insert into Pulling Eye/Bolt, crimp and install heat shrinkable sleeve.


The Pulling Eye pictured at right is a compression sleeve attachment to cable ends for pulling multi-conductor, multiplexed, or paralleled cables, both copper and aluminum, in a common pulling eye.

As a result of extensive testing, U.I.I. recommends these pulling attachments to facilitate careful handling of cables during the critical pulling phase of cable installation. These devices were designed to handle the toughest pulls with consistent reliablity and to avoid the usual necessity for discarding the several feet of damaged cable under the woven portion of basket-type pulling attachments.

The assemblies are easily waterproofed through the use of U.I.I. heat shrinkable sleeves with special flexible waterproof adhesive under-coating. Because the Pulling Eyes or Bolts use standard crimping tools, they are easily installed by cable manufacturers, utility splice crews, or electrical contractors. Simply strip cable and insert into Pulling Eye/Bolt, crimp and install heat shrinkable sleeve.

*Pulling Eyes or Bolts are available for conductor sizes from #2 AWG through 3750 kcmil.

*Pulling Eyes are available for multi conductor sizes up to 3/C 1000 kcmil solid dielectric cables.

*U.I.I. "Ultimate Loads" exceed the maximum loads recommended by IPCEA for insulated copper conductors by at least 60% in all sizes through
 2500 kcmil.

*For every device, U.I.I. "Ultimate Loads" exceed the maximum loads recommended by IPCEA for insulated copper conductors.